Firmware Versions 1.0.9 & 2.3.0
Flash firmware allows ePipe units to be updated in the field to newer
versions of firmware as they are released. The firmware is stored
permanently in the unit's flash memory. There are now two versions of
the firmware available for the 2000 family .
To see the current firmware revision and the model of your ePipe unit, using the browser-based ePipe Management Assistant go to
Alternatively, access the ePipe command line interface using the ePipe console port or a telnet client and run the following command:
You will only need to know the model of your ePipe unit if you are downloading using a TFTP server (see below).
ePipe Firmware 2.3.0
ePipe Firmware 1.0.9
Before you upgrade...
Please read the ePipe firmware Release Notes before upgrading the firmware of your ePipe.
Firmware image files to be downloaded to the ePipe via a TFTP server:
NOTE: Upgrading Firmware with the Windows Utility
Updating Firmware from Windows
Download the Windows 95/98/Me/NT/2000 flash upgrade software using the link below:
Run this software on your Windows system and follow the prompts. When upgrading the firmware, you will need to know the IP address and the privileged user name and password of the ePipe unit. See "What is my current firmware revision?" above to determine the model of your ePipe and its current firmware revision.
Updating firmware from a TFTP server
ePipe 2100 series units and ePipe 2200 series units require different firmware revisions. Select the correct firmware for your ePipe from the options below:
When upgrading the firmware, you will need to know the IP address and privileged user name and password of the ePipe unit. See "what is my current firmware revision" above to determine the model of your ePipe unit and its current firmware revision.
Copyright © 2002 ePipe Pty. Ltd. All rights reserved.